5.5KW Strut Channel Cold Steel Roll Forming Machine with 19 Stations

Quick Details

Main technical parameters:

1. Forming thickness: 1.5-2.5mm,galvanized coils yield strength≤G250MPa

2. working Line speed: 12M/min(not include cutting and punching stop time)

3. Max speed: 4-5M/min include cutting and punching stop time

4. Hydraulic punching device: 2 sets

5. roller stations: about 19 station main roller

6. levelling device: 7 roller levelling

7. material of roller: bearing steel, quenching treatment.

8. material of main shaft: 45# fine steel,

9. diameter of main axis: 75mm

10. main motor power: 7.5kW

11. motor power of hydraulic station: 7.5KW

12. hydraulic station pressure: 12MPa

13. electric control system: whole line adopted PLC control, Panasonic PLC

14. cutting type: hydraulic drive, cut after forming 

15. material of cutting blade: Cr12 , quenching process

Strut Channel Cold Roll Forming Machine

The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.

The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation,low cost.

Machine Components:

The machine is composed by 3T passive uncoiler, punching station, main roll forming, cutting unit, hydraulic station, computer cabinet, output table. 

Working Flow:

Decoiling → guiding and feeding →Levelling → Punching →Roll Forming →Hydraulic cutting → Output table