6-10 m/min Speed Cold Rolling Forming Machine with PLC Controlling System

Technical parameters

1. Matching material:  stainless steel

2. Material thickness range:1.5-2.5mm

3. Main motor power: 45 KW 

4. Forming speed: 6-10 m/min (include punching and cutting time)

5. Quantity of stands: about 24 stands

6. Shaft Material and diameter: 85mm, material is 40CR

8. Material Of The Stations: pig iron

9. Tolerance: 3m+-1.5mm

10. Way Of Drive: Gear box            

11. Controlling system: PLC

12. Total weight: about 25 Tons

13. Voltage: 380V/ 3phase/ 50 Hz

14. Size of the machine: L*W*H 13m*1.5m*1.2m

15. Material of forming rollers: CR12(better material than GCR15), coated with chromed treatment

16. Spacer treatment:plating

17. The tolerance: 1. the length will be +- 1mm

                              2. the holes distance will be +-0.5mm

Cutting and the control cabinet
Cutting:
(1)    Cutting motion: The main machine won’t stop while the saw cutting. The saw will have lead rail, it will tracking the material, the length will control by PLC. Comes the right length, it will cut while moving forward, After the cutting, the saw will send back where it started, and ready for next loop
(2)    Drive motor of the saw: 15KW
(3)    Length measuring: Automatic length measuring 
(4)    Tolerance of length: +/- 1.5mm
 

Control Box:  Siemens 
(1)    Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)    Automatic length measurement: 
(3)    Automatic quantity measurement
(4)    Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)    Length inaccuracy can be amended easily
(6).    Control panel: Button-type switch and touch screen
(7)    Unit of length: millimeter (switched on the control panel)

Main composition of the machine

The machinery line consists of 3.5 tons hydraulic de-coiler , leveling , material  guiding, servo feeding, press punching, roll forming system, fly saw cutting system ,run-out table, control cabinet with PLC

Working Flow

hydraulic De-coiling —electrical leveling—servo feeding—press punching—material guiding—roll forming—length sizing—fly saw cutting—receiving platform— Finish

3.5 Tons hydraulic un-coiler

Seven rollers leveling machine

Servo feeding machine